|
Shock Tower Front 1/12 â“ Graphite
#302099
CNC-machined top-quality graphite front shock tower offers numerous shock upper mounting positions, as well as numerous mounting positions for front C-hub upper suspension links.
|
|
|
Ackermann Extension Plate (2)
#302205
Set of CNC-machined graphite extension plates for mounting to steering blocks, providing a different Ackermann setup for improved steering for foam tire carpet racing. Includes all necessary mounting hardware.
|
|
|
Alu Steering Block Right For C-Hub Susp.
#302255
Alu Steering Block Right for C-Hub Suspension CNC-machined highest-quality duraluminum front right steering block for C-hub suspension. Includes two nylon bushings for ball-bearings.
|
|
|
Alu Steering Block Left For C-Hub Susp.
#302265
Alu Steering Block Left for C-Hub Suspension CNC-machined highest-quality duraluminum front left steering block for C-hub suspension. Includes two nylon bushings for ball-bearings.
|
|
|
Alu C-Hub For Steering Block - Caster 0°
#302275
CNC-machined highest-quality duraluminum C-hub with caster pre-set at 0 degrees for maximum off-power steering. Can be used for either left or right steering blocks; use only a matched pair of 0deg C-hubs together.
|
|
|
Composite C-Hub Front Block, Right - Soft - 3°
#302281
Molded C-hub for right steering block. Caster pre-set at 3° for neutral handling. Engraved with "R3" to easy identification. Soft rigidity. Use with left-side composite 3° C-hub (soft) #302283.
|
|
|
Composite C-Hub Front Block, Right - Medium - 3°
#302282
Molded C-hub for right steering block. Caster pre-set at 3° for neutral handling. Engraved with "R3" to easy identification. Medium rigidity. Use with left-side composite 3° C-hub
(medium) #302284.
|
|
|
Composite C-Hub Front Block, Left - Soft - 3°
#302283
Molded C-hub for left steering block. Caster pre-set at 3° for neutral handling. Engraved with "L3" to easy identification. Soft rigidity. Use with right-side composite 3° C-hub (soft) #302281.
|
|
|
Composite C-Hub Front Block, Left - Medium - 3°
#302284
Molded C-hub for left steering block. Caster pre-set at 3° for neutral handling. Engraved with "L3" to easy identification. Medium rigidity. Use with right-side composite 3° C-hub
(medium) #302282.
|
|
|
Composite C-Hub Front Block, Right - Soft - 6°
#302285
Molded C-hub for right steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "R6" to easy identification. Soft rigidity. Use with left-side composite 6° C-hub (soft) #302287.
|
|
|
Composite C-Hub Front Block, Right - Medium - 6°
#302286
Molded C-hub for right steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "R6" to easy identification. Medium rigidity. Use with left-side composite 6° C-hub (medium) #302288.
|
|
|
Composite C-Hub Front Block, Left - Soft - 6°
#302287
Molded C-hub for left steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "L6" to easy identification. Soft rigidity. Use with right-side composite 6° C-hub (soft) #302285.
|
|
|
Composite C-Hub Front Block, Left - Medium - 6°
#302288
Molded C-hub for left steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "L6" to easy identification. Medium rigidity. Use with right-side composite 6° C-hub (medium) #302286.
|
|
|
C-Hub Bushing (4)
#302290
Precision-machined bushing for front C-hub steering block pivot screws.
Set of 4.
|
|
|
Composite C-Hub Front Block, Right - Hard - 3°
#302325
Molded C-hub for right steering block. Caster pre-set at 3° for neutral handling. Engraved with "R3" to easy identification. Hard rigidity. Use with left-side composite 3° C-hub (hard) #302326.
|
|
|
Composite C-Hub Front Block, Left - Hard - 3°
#302326
Molded C-hub for left steering block. Caster pre-set at 3° for neutral handling. Engraved with "L3" to easy identification. Hard rigidity. Use with right-side composite 3° C-hub (hard) #302325.
|
|
|
Composite C-Hub Front Block, Right - Medium - 4.5°
#302327
Molded C-hub for right steering block. Caster pre-set at 4.5° for more on-power steering. Engraved with "R4.5" to easy identification. Medium rigidity. Use with left-side composite 4.5° C-hub (medium) #302328.
|
|
|
Composite C-Hub Front Block, Left - Medium - 4.5°
#302328
Molded C-hub for left steering block. Caster pre-set at 4.5° for more on-power steering. Engraved with "L4.5" to easy identification. Medium rigidity. Use with right-side composite 4.5° C-hub (medium) #302327.
|
|
|
Composite C-Hub Front Block, Right - Hard - 4.5°
#302329
Molded C-hub for right steering block. Caster pre-set at 4.5° for more on-power steering. Engraved with "R4.5" to easy identification. Hard rigidity. Use with left-side composite 4.5° C-hub (hard) #302330.
|
|
|
Composite C-Hub Front Block, Left - Hard - 4.5°
#302330
Molded C-hub for left steering block. Caster pre-set at 4.5° for more on-power steering. Engraved with "L4.5" to easy identification. Hard rigidity. Use with right-side composite 4.5° C-hub (hard) #302329.
|
|
|
Composite C-Hub Front Block, Right - Hard - 6°
#302331
Molded C-hub for right steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "R6" to easy identification. Hard rigidity. Use with left-side composite 6° C-hub (hard) #302332.
|
|
|
Composite C-Hub Front Block, Left - Hard - 6°
#302332
Molded C-hub for left steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "L6" to easy identification. Hard rigidity. Use with right-side composite 6° C-hub (hard) #302331.
|
|
|
Drive Shaft Replacement Plastic Cap 3mm (4) - V2
#305240
Low friction drive pin clips for protection and cushioning of drive shaft pin in diff outdrives. Set of four.
V2 Update: Both the material and design have been improved to reduce wear of the differential outdrives.
|
|
|
Wheel Axle-22mm-Integr. Hex Hub - (Factory Kit) (2)
#305311
CNC-machined hardcoated duraluminum rear wheel axles with hex hubs. Ultra-true, direct, wobble-free wheel mounting ensures âśslop-free" wheel rotation. Wheel axles have been strategically lightened to reduce rotating mass without compromising strength.
|
|
|
Wheel Axle â“ 22mm - Offset âś-1mmâť - Hard Coated (2)
#305312
CNC-machined hardcoated duraluminum rear wheel axles with hex hubs. Ultra-true, direct, wobble-free wheel mounting ensures âśslop-free" wheel rotation. Wheel axles have been strategically lightened to reduce rotating mass without compromising strength.
The wheel axles feature a -1mm offset which means that they are 1mm shorter than standard wheel axles.
|
|
|
Wheel Axle â“ 22mm - Offset âś+1mmâť - Hard Coated (2)
#305313
CNC-machined hardcoated duraluminum rear wheel axles with hex hubs. Ultra-true, direct, wobble-free wheel mounting ensures âśslop-free" wheel rotation. Wheel axles have been strategically lightened to reduce rotating mass without compromising strength.
The wheel axles feature a +1mm offset which means that they are 1mm longer than standard wheel axles.
|
|
|
Wheel Axle - 22 mm - Integr. Hex Hub - Spring Steel (2)
#305315
Optional wheel axles manufactured for XRAY by HUDY from the world-famous top-secret "Hudy Spring Steel(TM)". These are a direct replacement for the original duraluminum wheelaxles, and will be virtually impossible to damage or wear out. The wheelaxles are strategically CNC-machined so they are as light as possible to reduce rotating mass, while maintaining ultimate strength.
|
|
|
Drive Shaft - 32 mm - Spring Steel (2)
#305329
CNC-machined drive shafts from world-renowned top-secret "Hudy Spring Steel". These race-quality drive shafts are the smallest in the world, exclusively manufactured by HUDY. Set of 2.
|
|
|
Front Pivot Pin For C-Hub (2)
#307220
Front lower (outer) spring steel pivot pins for C-hub suspension. Hardened for very high durability and long life. Set of two.
|
|
|
High-Speed Ball-Bearing 10x15x4 Blue Covered (2)
#309054
New high-speed ball-bearings manufactured specially for XRAY. Top-quality professional ball-bearings for a super-free, super-smooth drivetrain. These highest quality ball-bearings are fitted with special polyamid blue covers, and are degreased and lightly oiled with AeroShell Fluid 12 oil for maximum smoothness, long life, highest tolerance and maximum performance.
|
|
|
Pin 2x10 (10)
#981210
Polished chrome pin. Dia. x length = 2mm x 10mm. Set of 10 pieces.
|
|
ID |
Product Name |
Released |
302272 |
|
Jul. 28, 2005 |
302273 |
|
Jul. 28, 2005 |
302251 |
|
May 09, 2005 |
302261 |
|
May 09, 2005 |
305312 |
|
May 09, 2005 |
305313 |
|
May 09, 2005 |
302325 |
|
Mar. 16, 2005 |
302326 |
|
Mar. 16, 2005 |
302327 |
|
Mar. 16, 2005 |
302328 |
|
Mar. 16, 2005 |
302329 |
|
Mar. 16, 2005 |
302330 |
|
Mar. 16, 2005 |
302331 |
|
Mar. 16, 2005 |
302332 |
|
Mar. 16, 2005 |
901304 |
|
Jul. 30, 2004 |
902306 |
|
Jul. 30, 2004 |
902310 |
|
Jul. 30, 2004 |
902312 |
|
Jul. 30, 2004 |
941015 |
|
Jul. 30, 2004 |
960030 |
|
Jul. 30, 2004 |
| |
|
|